UV weather resistant nylon PA66, tested by hot wire, needle flame, and ball pressure testing. Fiber reinforced 5%-60% customizable.
- Type: KLD6630UV
- Product Name: UV weather resistant nylon PA66, tested by hot wire, needle flame, and ball pressure testing. Fiber reinforced 5%-60% customizable.
Through hot wire, needle flame, and ball pressure testing.
Fiber reinforced 5% - 60% customizable.
Product Details:
Product features: high fluidity, weather resistance, UV resistance, enhanced - fiberglass reinforcement, high toughness, high rigidity, high gloss, easy processability. Industrial machinery injection molding is used for UV resistance and aging resistance. Industrial components have high fluidity, outstanding toughness, weather resistance, UV resistance, good rigidity, easy processing, and good surface smoothness. Widely used in the automotive industry, electronics and electrical, electric tools, household appliances, industrial machinery, sports equipment and other fields.
| Typical physical properties | Type： | KLD6630UV | |||
| Project | Condition | Value | Unit | Test method | |
| Physical Property | Water absorption rate | In water at 23 ℃ | 4.5 | % | ASTM D570 |
| density | 1.33 | g/cm³ | ASTM D792 | ||
| Shrinkage rate | Horizontal/Vertical | 0.56 | % | ASTM D955 | |
| Mechanical Performance | Tensile modulus | 7000 | MPa | ASTM D638 | |
| Bending modulus | 6800 | MPa | ASTM D790 | ||
| tensile strength | 150 | MPa | ASTM D638 | ||
| elongation at break | 2.5 | % | ASTM D638 | ||
| bending strength | 220 | MPa | ASTM D790 | ||
| Thermal performance | Hot deformation temperature | 1.82MPa | 250 | °C | ASTM D648 |
| Linear expansion coefficient | 23℃ to 80℃ | 3.5*10^-5 | °C | DIN 53752 | |
| melting point | 260 | °C | ASTM D789 | ||
| Electrical performance | Surface resistivity | / | ohms | IEC 60093 | |
| Dielectric constant | 1MHz | / | F/m | IEC 60250 | |
| Leakage trace index | V | IEC 60112 | |||
| Volume resistivity | / | ohms·m | IEC 60093 | ||
| Flame retardant performance | Flame retardant level | HB | no | UL 94 | |
| Other performance | colour | NC-BK | no | Internal methods | |
| Filler | 33 | % | Internal methods | ||
| Notch impact strength | 16 | kJ/m² | ASTM D256 | ||
| Injection molding process | Drying temperature | 100-120 | °C | ||
| Drying time | 4-6 | hr | |||
| Forming temperature | 260-290 (±10-20) | °C | |||
| Mold temperature | 80-120 | °C | |||
| Material status: | Normal circulation | ||||
| Characteristic: | High toughness, easy processing, high gloss, weather resistance, aging resistance, high rigidity, high flow, UV resistance | ||||
| Purpose: | Automotive industry, electronics and electrical, electric tools, household appliances, industrial machinery, sports equipment, etc | ||||
| Processing method: | Injection molding | ||||
| Additives: | Fiber reinforced, 5-60% customizable | ||||
| Form: | Granules | ||||
| Source of physical parameters: | Non national third-party testing certification submitted by manufacturers for inspection | ||||
More Products:
Nitrogen based flame retardant nylon PA66 PA6, tested by hot wire, needle flame, and ball pressure testing. Fiber reinforced 5%-60% customizable.
Type: KLD6006V0
Nitrogen based flame retardant nylon PA66, tested by hot wire, needle flame, and ball pressure testing. Fiber reinforced 5%-60% customizable.
Type: KLD6600V0
Red phosphorus flame retardant nylon PA66, tested by hot wire, needle flame, and ball pressure testing. Fiber reinforced 5%-60% customizable.
Type: KLD6606V0
Reinforced flame-retardant nylon PA66 PA6, fiber reinforced 10% -50% can be customized
Type: KLD6030V0
Reinforced flame-retardant nylon PA66 PA6, fiber reinforced 10% -50% can be customized
Type: KLD6630V0
Fiberglass reinforced nylon PA66GF PA6GF, can be customized with 10% -50% fiber reinforcement
Type: KLD6030G
Fiberglass reinforced nylon PA66GF PA6GF, can be customized with 10% -50% fiber reinforcement
Type: KLD6630G
Reinforced and toughened nylon PA66 PA6, customizable with 10% -50% fiber reinforcement
Type: KLD6030GT