PC ABS Alloy Color Masterbatch
Optimized for PC/ABS blends used in automotive interiors and laptop housings.
Our PC/ABS alloy color masterbatch features a balanced pigment system compatible with both PC and ABS phases. It provides excellent color uniformity in PC/ABS blends used for automotive interiors and durable electronics.
Product Features
- Compatible with both PC and ABS phases
- Proper flow for thin-wall molding
- Good surface appearance
- Automotive interior odor spec
- UV stability for interior trim
Typical Applications
Typical Physical Properties
The following data represents typical values for this specific grade. Values may vary slightly depending on color and pigment loading. All tests performed according to the referenced ISO/ASTM standards.
Physical Properties
| Property | Test Method | Value |
|---|---|---|
| Carrier Resin | — | PC/ABS alloy |
| Pigment Loading | — | 20-40% |
| Melt Index (260°C/5 kg) | ISO 1133 | 10-25 g/10 min |
| Density | ISO 1183 | 1.1-1.6 g/cm³ |
| Moisture Content | ISO 15512 | < 0.05% |
Processing Conditions
| Parameter | Value |
|---|---|
| Drying | 105-110°C, 3-4 hours |
| Processing Temperature | 240-280°C |
| Addition Ratio | 2-4% |
| Mold Temperature | 60-90°C |
Color Performance
| Property | Test Method | Value |
|---|---|---|
| Delta E (CIE Lab) | ISO 7724 | < 1.0 |
| Lightfastness | ISO 105-B02 | 6-8 |
| Heat Stability | Internal | 5 min @ 270°C |
Disclaimer: the information and technical data provided here are typical values and are not intended to be used as specifications. Testing under your own processing conditions is recommended to confirm suitability. For food-contact or medical applications, please contact us for grade-specific compliance documentation (FDA, EU 10/2011, USP Class VI, ISO 10993).
Other PC Grades
Each grade is optimised for specific applications and processing requirements. Compare the options below or ask us for a recommendation.
